BioGuard SilkGuard Complete 1 Inch Chlorine Tabs (4.5lb)

SilkGuard Complete 1 Inch Chlorine Tabs

Vendor
BioGuard
Regular price
$49.99
Sale price
$49.99
Regular price
Sold out
Unit price
per 

Description

- Mulit-Benefit 1" Chlorinating Tablets
- With Algae killing crystals
- Longer lasting and softer water with SmartGuard technology

BioGuard SilkGuard Complete Multi-Benefit 1 Inch Chlorinating Tablets differ from traditional chlorine because of its SilkGuard Technology.  This revolutionary product will soften water and protect your pool surfaces and equipment from scale, corrosion and staining, all while killing any algae or bacteria. SunShield Technology offers protection from the sunlight helping these tablets last longer than traditional chlorine tablets.


Dosage

Add 16 oz of this product (two tablets) per 10,000 gallons of pool water


Directions

Ensure all pool equipment is working properly. Clean or backwash filter following manufacture's directions. Adjust pH to between 7.2-7.6.  In chlorinated pools. add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual. 

Initial Treatment:

  1. If water is cloudy or green, superchlorinate pool with appropriate shock product until pool is clear
  2. If using a feeder or floater, add 16 ounces of this product (approximately 27 tablets) per 10,000 gallons of pool water to feeder or floater
  3. Adjust the feeder or floater following manufacture's instructions to establish a free available chlorine level between 1-4 ppm
  4. Allow water to circulate at lest 4 hours and then test for the free available chlorine level
  5. When free available chlorine level is adjusted to 1-4 ppm, add the preventative algicide appropriate to your needs
  6. If using a plastic skimmer, add 16 oz of this product (approximately 27 tablets) per 10,000 gallons of pool water
  7. Place tablets in skimmer basket 
  8. Allow water to circulate at least 4 hours before testing 
  9. Test for the free available chlorine level adding more tablets as necessary to establish a free available chlorine level of 1-4 ppm
  10. When free available chlorine level is adjusted to 1-4 ppm, add the preventative algicide appropriate to your needs 

Routine Maintenance:

  1. Add 16 oz of this product (approximately 27 tablets) per 10,000 gallons of pool water per week, or as often as needed to the floater, feeder of skimmer to maintain a constant free available chlorine level of 1-4 ppm
  2. Sunlight, rainfall, temperature, number of swimmer, and frequency of pool use affect the rate of chlorine residual loss so check the floater, feeder, or skimmer ofter and refill as needed

Ingredients

- Trichloro-s-triazinetrione: 91.57%
- Copper Sulfate pentahydrate*: 0.99%
- Other Ingredients: 7.44%
(Available Chlorine: 84%)
(*Metallic copper equivalent 0.25%)