Banish Algaecide

Description

- Premium formula, highly effective, kills ALL types of algae
- Fast-acting, non-foaming, producing results in 24 hours
- Use in chlorine or bromine pools with all surfaces or filter types

BioGuard Remedy Banish is a highly effective, patented, non-staining algicide that kills and controls algae in swimming pools.  This product is especially recommended for killing and controlling green, blue-green(frequently called black or spot algae) and mustard algae growths.

Dosage

- Visible Algae Dosage:

• Add 16 ounces of this product per 10,000 gallons of pool water.

- Prevention Dosage:

• Initially apply 8 ounces of this product per 10,000 gallons of pool water. Thereafter, for weekly application add 1.5 ounces per 10,000 gallons of pool water. For two week application intervals add 3 ounces per 10,000 gallons of water every other week. Apply more if pool value is diluted by heavy rain, frequent backwashing or partial drain/refill.

Directions

Prior To Application:

1. Ensure all equipment is working properly. If necessary clean the filter system.
2. Adjust pH between 7.2-7.6
3. Establish and maintain proper chlorine or bromine levels. In chlorine-treated pools, add stabilizer to establish a minimum level of 30-40 ppm of cyanic acid to reduce the degrading effects of sunlight on chlorine residual.
4. Vacuum leaves and any other foreign debris from pool.
5. Brush visible algae thoroughly from the pool's surface with a surface-compatible brush.

Treatment Of Visible Pool Algae:

1. Apply a BioGuard oxidizer per label directions.
2. Allow to circulate for 1 hour.
3. With pump and filter operating, apply 16 fluid ounces of this product per 10,000 gallons of pool water directly to the pool water in areas of heaviest algae growth.
4. Continuously circulate pool water for 24 hours.
5. The next day, thoroughly brush pool surfaces.
6. Prior to re-entry, test chlorine level. Do not enter pool until chlorine level is between 1-4 ppm.
7. In cases of persistent algae, repeat brushing and product application after 2-4 days.

To Prevent Pool Algae:

1. Initially apply 8 ounces of this product per 10,000 gallons of pool water.
2. Thereafter, for weekly application add 1-1/2 ounces per 10,000 gallons of pool water. For two week application intervals add 3 ounces per 10,000 gallons of pool water every other week. Apply more often if pool volume is diluted by heavy rain, frequent backwashing or partial drain/refill.
3. Wait at least 15 minutes after application before entering pool.

Ingredients

- Copper(Metallic): 3.3%
- Other Ingredients: 96.7%